LED Autolamps 12WM-2 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack
ECE Approved 12/24V Reverse Lamp 8mm Ultra-Slim, 0.4m Cable, 3M Tape or Screw Mount
Product Overview
The LED Autolamps 12WM-2 is a 12/24V LED reverse lamp in the ultra-slim 12 series form factor, measuring 131mm x 30mm x 8mm. Supplied in a blister pack with a 0.4m pre-wired cable, it mounts via 3M adhesive tape or screws on trailers, caravans, trucks, and commercial vehicles where a low-profile reverse lamp is required.
ECE approved under E9 23R00/22177 and rated IP67, it draws 0.21A at 13.8V for efficient operation in multi-lamp builds. Backed by a 5-year warranty, the 12WM-2 completes the 12 series alongside the 12ACM-2 indicator and 12RCM-2 stop/tail lamps for a fully matched low-profile rear lighting set.
Features & Benefits
- Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels
- 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces
- ECE road approved — certified under E9 23R00/22177 for legal on-road use as a reverse lamp
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 0.4m pre-wired cable — ready to connect straight out of the pack
- Low current draw — 0.21A at 13.8V for efficient operation in multi-lamp trailer and caravan setups
- 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 12WM-2 |
| Lamp Type | Reverse |
| Voltage Range | 12V – 24V |
| Dimensions | 131mm x 30mm x 8mm |
| Current Draw | 0.21A @ 13.8V |
| Cable Length | 0.4m |
| Mounting | Surface mount (3M tape / screw) |
| Protection Rating | IP67 |
| Compliance | ECE E9 23R00/22177 |
| Packaging | Blister pack |
| Warranty | 5 years |
Compatible With / Goes Well With
- Trailers, caravans, trucks, and commercial vehicles requiring low-profile reverse lamps
- 12V light vehicles and 24V heavy transport applications
- LED Autolamps 12ACM-2 clear lens indicator lamp (same 12 series form factor)
- LED Autolamps 12RCM-2 clear lens stop/tail lamp (same 12 series form factor)
- LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 12WM-2 approved for road use in Australia?
Yes. The 12WM-2 is ECE approved under E9 23R00/22177, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp.
What mounting options does the 12WM-2 support?
It can be mounted using 3M adhesive tape or screws on flat vehicle panel surfaces — adaptable to a wide range of trailer, caravan, and truck body layouts.
How does the 12WM-2 fit with other 12 series lamps?
The 12WM-2 shares the same 131mm x 30mm x 8mm form factor as the 12ACM-2 indicator and 12RCM-2 stop/tail lamps, making it a natural match for a uniform full-function rear lighting set across all functions.
What is the IP rating on the 12WM-2?
The 12WM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting.
What warranty does the 12WM-2 carry?
The 12WM-2 is backed by a 5-year warranty from LED Autolamps.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
LED Autolamps 12WM-2 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack
LED Autolamps 12WM-2 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack
ECE Approved 12/24V Reverse Lamp 8mm Ultra-Slim, 0.4m Cable, 3M Tape or Screw Mount
Product Overview
The LED Autolamps 12WM-2 is a 12/24V LED reverse lamp in the ultra-slim 12 series form factor, measuring 131mm x 30mm x 8mm. Supplied in a blister pack with a 0.4m pre-wired cable, it mounts via 3M adhesive tape or screws on trailers, caravans, trucks, and commercial vehicles where a low-profile reverse lamp is required.
ECE approved under E9 23R00/22177 and rated IP67, it draws 0.21A at 13.8V for efficient operation in multi-lamp builds. Backed by a 5-year warranty, the 12WM-2 completes the 12 series alongside the 12ACM-2 indicator and 12RCM-2 stop/tail lamps for a fully matched low-profile rear lighting set.
Features & Benefits
- Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels
- 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces
- ECE road approved — certified under E9 23R00/22177 for legal on-road use as a reverse lamp
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 0.4m pre-wired cable — ready to connect straight out of the pack
- Low current draw — 0.21A at 13.8V for efficient operation in multi-lamp trailer and caravan setups
- 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 12WM-2 |
| Lamp Type | Reverse |
| Voltage Range | 12V – 24V |
| Dimensions | 131mm x 30mm x 8mm |
| Current Draw | 0.21A @ 13.8V |
| Cable Length | 0.4m |
| Mounting | Surface mount (3M tape / screw) |
| Protection Rating | IP67 |
| Compliance | ECE E9 23R00/22177 |
| Packaging | Blister pack |
| Warranty | 5 years |
Compatible With / Goes Well With
- Trailers, caravans, trucks, and commercial vehicles requiring low-profile reverse lamps
- 12V light vehicles and 24V heavy transport applications
- LED Autolamps 12ACM-2 clear lens indicator lamp (same 12 series form factor)
- LED Autolamps 12RCM-2 clear lens stop/tail lamp (same 12 series form factor)
- LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 12WM-2 approved for road use in Australia?
Yes. The 12WM-2 is ECE approved under E9 23R00/22177, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp.
What mounting options does the 12WM-2 support?
It can be mounted using 3M adhesive tape or screws on flat vehicle panel surfaces — adaptable to a wide range of trailer, caravan, and truck body layouts.
How does the 12WM-2 fit with other 12 series lamps?
The 12WM-2 shares the same 131mm x 30mm x 8mm form factor as the 12ACM-2 indicator and 12RCM-2 stop/tail lamps, making it a natural match for a uniform full-function rear lighting set across all functions.
What is the IP rating on the 12WM-2?
The 12WM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting.
What warranty does the 12WM-2 carry?
The 12WM-2 is backed by a 5-year warranty from LED Autolamps.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
ECE Approved 12/24V Reverse Lamp 8mm Ultra-Slim, 0.4m Cable, 3M Tape or Screw Mount
Product Overview
The LED Autolamps 12WM-2 is a 12/24V LED reverse lamp in the ultra-slim 12 series form factor, measuring 131mm x 30mm x 8mm. Supplied in a blister pack with a 0.4m pre-wired cable, it mounts via 3M adhesive tape or screws on trailers, caravans, trucks, and commercial vehicles where a low-profile reverse lamp is required.
ECE approved under E9 23R00/22177 and rated IP67, it draws 0.21A at 13.8V for efficient operation in multi-lamp builds. Backed by a 5-year warranty, the 12WM-2 completes the 12 series alongside the 12ACM-2 indicator and 12RCM-2 stop/tail lamps for a fully matched low-profile rear lighting set.
Features & Benefits
- Ultra-slim 8mm profile — low-profile design suits tight installation spaces on trailer, caravan, and truck body panels
- 3M tape and screw fitting — dual mounting options for adhesive or screw-fixed installation on a wide range of surfaces
- ECE road approved — certified under E9 23R00/22177 for legal on-road use as a reverse lamp
- IP67 rated — fully sealed against dust and water immersion, built for exposed outdoor and transport environments
- 0.4m pre-wired cable — ready to connect straight out of the pack
- Low current draw — 0.21A at 13.8V for efficient operation in multi-lamp trailer and caravan setups
- 12/24V dual voltage — compatible with both 12V light vehicles and 24V heavy transport without modification
- 5-year warranty — backed by LED Autolamps' full warranty programme
Technical Specs
| Specification | Detail |
|---|---|
| SKU | 12WM-2 |
| Lamp Type | Reverse |
| Voltage Range | 12V – 24V |
| Dimensions | 131mm x 30mm x 8mm |
| Current Draw | 0.21A @ 13.8V |
| Cable Length | 0.4m |
| Mounting | Surface mount (3M tape / screw) |
| Protection Rating | IP67 |
| Compliance | ECE E9 23R00/22177 |
| Packaging | Blister pack |
| Warranty | 5 years |
Compatible With / Goes Well With
- Trailers, caravans, trucks, and commercial vehicles requiring low-profile reverse lamps
- 12V light vehicles and 24V heavy transport applications
- LED Autolamps 12ACM-2 clear lens indicator lamp (same 12 series form factor)
- LED Autolamps 12RCM-2 clear lens stop/tail lamp (same 12 series form factor)
- LED Autolamps 12ARM-2 stop/tail/indicator lamp pair (same 12 series)
- LED Autolamps wiring harnesses and trailer lighting accessories
Frequently Asked Questions
Is the 12WM-2 approved for road use in Australia?
Yes. The 12WM-2 is ECE approved under E9 23R00/22177, meeting international road approval standards accepted for legal on-road use in Australia as a reverse lamp.
What mounting options does the 12WM-2 support?
It can be mounted using 3M adhesive tape or screws on flat vehicle panel surfaces — adaptable to a wide range of trailer, caravan, and truck body layouts.
How does the 12WM-2 fit with other 12 series lamps?
The 12WM-2 shares the same 131mm x 30mm x 8mm form factor as the 12ACM-2 indicator and 12RCM-2 stop/tail lamps, making it a natural match for a uniform full-function rear lighting set across all functions.
What is the IP rating on the 12WM-2?
The 12WM-2 is rated IP67, meaning it is fully sealed against dust and capable of withstanding water immersion — suitable for exposed trailer and caravan mounting.
What warranty does the 12WM-2 carry?
The 12WM-2 is backed by a 5-year warranty from LED Autolamps.
